Bir internet sitesinde şu şekilde anlatılmış. Yapmaya zorlanırsan bizzat yardım ederiz. Ben gözümü kapadım ve yaptım oldu. Gayet memnunum.

How to make proper upgrade my i600 device to WM6Standard

What you need to know before start:

- update won't work in Windows Vista (boot loader can't find files)
- for some case samsung modem driver should be instaled before upgrading from earlier versions
- phone must be charged to full (3 bars)
- eject miniSD card.
- get write S/N phone
- don't unplug phone while upgrading
- don't try to upgrade i607 with i600 roms
- do it on your own risk


1) First, you need to upgrade i600 to XXGD1 version

- download XXGD1 update, unpack file i600XXGD1_REV15.exe
- if it's your first upgrade, you should install samsung modem driver
- connect usb cable to PC, ActiveSync must find device,
- go to options and disable: usb connection


- turn off device "power off"
- turn on to boot mode by hold 3 keys shown on picture below


- run i600XXGD1_REV15.exe and press start button to start upgrading



- wait till end after time counting digits (about 5min)


2) Settings to upgrade i600 do WM6

I. Downloading WM6 upgrade

- go to page: http://www.samsungmobile.com/promotion/i600/index.jsp
- chose for example Sweden
- type serial number: i600XXGD1
- next fill registry form, with proper S/N number (remember to type it in capital letters).



Number could be found under battery S/N.

- download from site 3 files
Samsung modem driver http://fus.samsungmobile.com/i600/Samsung_..._modem_4.34.zip
ActiveSync 4.5 http://fus.samsungmobile.com/i600/ActiveSy...glish_setup.msi
i600UXXupdater.exe http://fus.samsungmobile.com/I600/i600UXXupdater.exe

- unpack and install Samsung modem driver (run setup exe)



- install ActiveSync 4.5, after that check if device is finding by connect to PC



II. Changing phone version to Netherlands (panateo method discovered)

- type on phone *#1546792*# (or run hidden program in WindowsAdminSettings.exe) to get to admin settings menu
- chose option "Preconfiguration"
- type password: *#81230*#
- select country: Netherlands
- select operator: Vodafone

Done, phone will reset.

III. Upgrading process

- run file i600UXXupdater.exe
- select English language


- connect i600 to PC (device must be found by ActiveSync)
- select all checkboxes and click "Verify device"

If You get message "Incorrect software version" , unplug and plug again usb cable, and click again "Verify device".



- after that you should se windows with information "Device id verified"



- on phone, there appear graphic information, to press and hold: "left menu" + "camera key"



- phone will restart and should run in boot mode.

If not, then turn off, and hold "power" + "right soft key" + "camera key / back key" to run boot mode


You should see updating on phone screen


On PC would be something like this



After all complete, wait (about 5 min) to load phone, and automatic preconfiguration.

Other information:
Cardwell Plugin and Piscel Viewer is present
Pda/phone/eboot version: i600uxxgg2
It has other language to chose after install from regional settings

Changes:
- faster
- new icons and look
- easier navigation and use contacts/calendar
- and many more

Other faq's:

1) What to do if my phone is a brick by flashing with wrong rom?
Solution: http://www.modaco.com/index.php?showtopic=...st&p=823872

2) What is the passoword for Internal menu in Admin settings?
Paswword: bj3open